REAL-TIME INFORMATION SYSTEMS
FOR CONTROL CENTERS

News

MODES-Terminal
08-11-2009 | Products

Data exchange system for generating equipment configuration and parameters

Monitor Electric is in closing stage of creating the System for Data exchange for generating equipment configuration and parameters with market participants in format XML53500—"MODES-Terminal", custom-made for SO UPS.

KOCMOC
06-01-2009 | Products

COSMOS maintenance

Our company starts to provide services for the technical support of complex software "COSMOS", intended for operational modes calculation systems based on telemetry data.

Maintenance is carried out in close collaboration with its author—Prihno Vitaly Leonidovich.

TGC-1
04-14-2009 | Installation

Commissioning of data acquisition, processing and analysis center in TGK-1, Open JSC

In March 2009 in TGK-1, Open JSC "Automated system for Center of technological data processing" is finally put in constant operation after trial performance. Monitor Electric was the general contractor.

Though the data model of TGK-1, OJSC is pretty large, all required project documentation development, equipment installation and precommissioning were done on a tight schedule.

Successful supervisory control with CK-2007 in Belgorodskoe RDU
01-22-2009 | Installation

Successful supervisory control with CK-2007 in Belgorodskoe RDU

Joint pilot project of ODU Center and JSC "MRSK Center" in supy control of 110 kV breakers from Belgorodskoe RDU started in 2008. Within the bounds of the project in the end of 2008 a new version of SCADA/EMS CK-2007 was implemented in Belgorodskoe RDU, which ensures supervisory control via IEC 60870-5-104 with functionality of current state determination, command sending, confirmation receive and command execution control.

Meeting in ODU South
10-21-2008 | Installation

Start of data collection for new SCADA/EMS at SO UPS CDU/UDO level

On 15-16 October, 2008 in UDO South branch of SO UPS, JSC, there took place a meeting devoted to data collection and entry for Siemens Power CC SCADA/EMS according to Project "New SCADA/EMS for SO UPS".

In that project Monitor Electric performs one of the most important and difficult part of works – data collection and entry.

Participation in workshop in ODU Belorussia
06-06-2008 | Installation

Participation in workshop for the results of implementation of SCADA/EMS CK-2003 and Smart-FEM in UDO Belorussia

On May,22 there took place a workshop in UDO Belorussia for the results of implementation of new hardware-software system on the bases of SCADA/EMS CK-2003 and Smart-FEP.

All participants of the workshop made special mention of the high-quality results achieved in short terms. UDO experts' qualification and aspiration for new technologies had no small share in the success.

Monitor Electric is Microsoft Best Partner 2007
04-29-2008 | Partners

Monitor Electric is Microsoft Best Partner 2007

Monitor Electric Company was awarded the title "Microsoft Best Partner 2007" in the category "Strategic partnership" by software company Microsoft on April 25 at Microsoft Partner Program Forum in Moscow.

Participation in scientific and technical workshop
03-31-2008 | Conferences

Participation in scientific and technical workshop "Modern systems of data acquisition, transmission, processing, and displaying at power system resources."

Vadim Nesterenko, director general of Monitor Electric Company, addressed the ninth specialized scientific and technical workshop on "Power system SCADA development tendencies".

The address summarized development stages of SCADA system CK-2003 in the largest power governing body of the country—SO-CDU UES of Russia.

Operational testing of SCADA/EMS CK-2007 at TGC-8 plants
03-13-2008 | Installation

Operational testing of SCADA/EMS CK-2007 at TGC-8 plants

Operational testing of telemetric and communication systems at TGC-8, JSC is underway.

The core of the systems installed at objects of TGC-8 is state-of-the-art SCADA/EMS CK-2007 version 7.1, turned on in the mode without "central transmitter-receiver station" for data collection from measuring devices of the lower level ION, WAGO via Modbus protocol and new data retransmission into control centers of SO-CDU branches.

OTS 'Finist' – coming soon...
12-27-2007 | Installation

OTS "Finist"—coming soon

Beta of a new generation operator training simulator "Finist" had been presented in SO-CDU by Monitor Electric engineers.

New approaches to power system elements and regimes modeling were demonstrated.

Hide optional panel